Leave Your Message

500W 90A Medium Size Mobility Scooter with CE

Overall Dimension 1200*600*1013mm
Gross Weight 180lbs(82 Kg)
Turning Radius 1200mm
Max. Speed 7.5 mph(10kph)
Max. degree of climbing 8゜
Max. Range 19miles(30KM)
Max. Load  136Kg
Motor 400W/24V
Battery Capacity 35AH*2(vrla battery)
Battery Weight 26Kg
Charger 24V 5A

    Features

    Powerful acceleration 
    Long driving range  
    Ergonomic design
    Comfortable seats
    Adjustable tiller angle with charging function
    Full suspension
    Puncture proof non-marking wheels & pneumatic wheels( Front wheels 9”&rear wheels 10")

    R301S-8

    Specifications

    Overall Dimension 1200*600*1013mm
    Gross Weight 180lbs(82 Kg)
    Turning Radius 1200mm
    Max. Speed 7.5 mph(10kph)
    Max. degree of climbing 8゜
    Max. Range 19miles(30KM)
    Max. Load  136Kg
    Motor 400W/24V
    Battery Capacity 35AH*2(vrla battery)
    Battery Weight 26Kg
    Charger 24V 5A
    Wheel Size Front 9” solid / pneumatic  Rear 10” solid/ pneumatic
    Ground Clearance 80mm
    Controller 24V 70A PG/ 90A DYNAMIC
    Carton size 1360mm*645mm*710mm
    Packing Quantity 39pcs/20GP, 78pcs/40HQ

    Control panel

    intuitive control pane, it is easy to find yellow speed knob, red horn button,green front light button, finger lever(Wig-Wag) and battery level indicator Gauge.

    R300S-1
    LED front light and turning signal lamp
    R301S-2
    R301S-17

    Puncture Proof Tires(Standard) & Pneumatic Tires

    Puncture proof non-marking & free maintenance wheels full suspension 4 wheels
    R301S-11
    R300S-4
    pneumatic wheels are deluxe version and ,which improves riding comfort on various roads

    Brake Release/ Freewheel Operation

    The brake release lever is situated at the right rear of the scooter. This lever allows you to disengage the drive mechanism and push the scooter in ‘freewheel’ mode. To disengage the drive, push the lever to the front of the scooter as shown in the image below. The scooter can now be pushed.
    Simply push the lever toward the rear of the scooter to re-engage the drive mechanism (the scooter c an now be driven). The scooter will not operate when the lever is in the disengaged position. The scooter must be turned off and on by the key switch to reset the circuits before it will resume normal operation. A 9 flash error will show if the brake is disengaged when it is switched on.

    R300S-4

    Seat Swivel& Slide, Captain Seat With Headrest Is Deluxe Version

    The seat has a lockable swivel base to allow easier transfers. Simply lift the lever and rotate the seat at the same time. Releasing the lever will allow the seat to lock in position. The seat locks in 45 degree intervals. Always ensure the seat is in a locked position before mounting or dis-mounting the scooter. The seat should always be locked facing forward whilst driving
    Seat Removal
    To remove the seat, fold down the back of the seat and simply lift the seat away from the chassis while lifting the seat swivel lever.
    Do not hang baggage or other objects on the back of the seat as this may affect stability.
    Arm Adjustments
    On each side of the seat towards the back there are two hand knobs, these are to adjust the width of the armrests or to remove then for transport.
    If removing the armrests for transport, ensure that the hand knobs are re-tightened to avoid them rattling loose and falling out. Do not apply full body weight to the armrests for transferring. Lift the arm up out of the way to transfer to another seat

    R300S-11

    Battery Box Charging Socket And Circuit Breaker Reset,Externally Chargeable

    2x 35Ah ,driving conditions, the batteries will provide a range of 30km of travel. However, even if the power scooter is not in use, we recommend that the batteries are charged periodically

    R301S-14
    R301S-16

    Manoeuvrability ,seat can be easily dissembled and tiller can be adjustable so that they can fit into most vehicles for the purpose of traveling.

    Notes

    1. Turn the power off when transporting or not using mobility scooters.
    2. Ensure the seats is in a fixed position facing forwards before driving.
    3. Ensure the tiller is secure.
    4. Ensure the batteries are fully charged before your journey.
    5. Avoid rough or soft terrain and long grass wherever possible.
    6. Follow the maintenance guide to ensure safe operation of mobility scooters.

    Leave Your Message